Anyone know exactly the 2010/ebr ecm cooling fan #s?

[lawdog]

Yes. Ok let me clarify a little. For speed based fan control you would need your ECM flashed to BUE1D EEPROM or newer. 2008 bikes can probably do it. Some 2009 models may already have the newer EEPROM and 2010 have it. If you are older then 2008 then you can only control based on temp. You can change the temps if you want to but you can't get the speed control.

 

[moshaholic2]

Awesome info!

I know my 09 is a BUEZD flash

So now we'll have to track down dealers that can re-flash (difficult here since they claim not to even have simple things like spark plugs for Buells[mad] )

Or find an 08/ 09 that has had the updated flash for us to grab

Im going to start a thread looking for those files so we have a higher chance finding them

 

[snrusnak]

Seeing I have an 05 and can't do the speed based fan settings, anyone have thoughts(for or against) adjusting the temps only?

 

[lawdog]

I changed mine. I would lower the temps a bit, shorten the key off run time, and leave the voltage alone. Fan may run more but is that a bad thing? Besides wearing out faster? I like cool!

Running open loop at idle a little richer makes a huge difference with temps! Along with rss another good mod.

 

[snrusnak]

That's exactly what I was thinking. I don't mind the fan running at all as long as it's doing it's job.

I plan to get a wideband O2 at some point to do some tuning. One of these days.... lol

 

[OverRev]

Hi, I have a 08 XB12S, i just recently upgraded my exhaust and had EBR ECM swapped. i do notice the different cooling programs and in fact, i would prefer to have the fan running for a bit after the bike stops. is there anyway i can program the stock ECM to get this result or can i program the EBR ECM?

P.S. i bought the cable but don't have any program, i was told there is no free software for 08+ ECM

 

[moshaholic2]

Ecmdroid along w/ a bluetooth module can access the EBR ecm... It likely cant alter it though.

You could in theory copy the EBR ecm info w/ ecm droid and then apply it to your stock ecm. Then w/ ecm droid set it to run after shut off aswell.

 

[OverRev]

Can i use the cable with ECMdroid? and r u saying the EBR ECM is not programmable? but the stock one is?

 

[stellio78]

You'll want to use Tunerpro RT with the cable on your 08+ Buell

Tones of info here http://www.xoptiinside.com/tunerpro_files__xdf_-_adx__other_programs/tunerpro_rt_data

 

[ich]

Gähn
http://www.ukbeg.com/forum/viewtopic.php?f=17&t=14802
2 Jahre alt ...

 

[moshaholic2]

Can i use the cable with ECMdroid? and r u saying the EBR ECM is not programmable? but the stock one is?

The EBR ecu is only programable with the EBR software.

Not sure if you can connect a cable to your phone or tablet to run ecm droid. It may be set up to run by bluetooth only.

 

[ich]

The EBR ecu is only programable with the EBR software.

wer erzählt eigentlich immer diesen schwachsinn? ebr? bekommen die ihren scheiss nicht mit ehrlichen mitteln verkauft?
http://ecmspy.com/supported.shtml

 

[stellio78]

Is it too much trouble to write in english?

If you're interested in sharing info on this forum that would be your best bet.

 

[moshaholic2]

Maybe ecmspy can do it now. Previously it would brick your ecm. Id wait to hear from someone that has successfully done it before messing with a $300 ecm.

I can read EBR file and save it on my phone. But, I didnt try to alter it as previously they were locked and didnt want to risk wrecking it.

 

[SEXT9]

Here is stock information. I will get the EBR info from Sext9. All temps are converted from C to F. Stock programming is done in metric.

My stock bike......
2009 Buell XB12R- BUEZD
Config -none
Key on- fan on at 455, off at 383
Key off- fan on at 437, off at 383, 30 min max run time, 11.5v min voltage
Speed- none

2010 Buell XB12R- BUE2D
Config- enable speed based control
Key on- fan on at 428, off at 356
Key off- fan on at 374, off at 338, 3 min max run time, 11.5v min voltage
Speed- Turns on at 13 mph and off at 9 mph. (There is a fan on and fan off temp vs. speed table)

Fan On Table Fan Off Table
Speed Temp Speed Temp
13 428 9 320
18 302 24 140
65 302 65 140
77 428 77 266

The data for both ECM's was sent over with a link.

Everyone else. Give me a bit with Tuner Pro and I'll upload the link to those files.

 

[SEXT9]

My bike is a 2010 Buell XB12S with a race kit installed. Both the stock and the EBR ECM read as a BUE2D242. They are both in these files so you can compare them.

Here's the link to the text files I provided lawdog:
CLICK HERE

I spent all morning jacking around with TunerPro RT. I didn't have it setup on this machine and I forgot how to use it. So it was a relearn for me.

Here's the BIN files TunerPro RT spit out:
CLICK HERE

Sorry if I didn't get what you're looking for. My bike runs pretty damn good. So I haven't been troubleshooting the ECM. If there's something else you need let me know.

 

[stellio78]

Nice sharing, thanks.

Might have to load all my Buell stuff to share like that, what site do you use?

 

[SEXT9]

I use Dropbox. It syncs between all my devices and provides public links. It's free

 

[stellio78]

Cool thanks.

Also that EBR bin file is specific for the Buell race pipe?

 

[lawdog]

You can program an EBR ecm just like the stock. I do not know if Ecmspy or Tunerpro can as I use my own but it is certainly possible. Tomorrow morning I will take a look at the EBR eeprom and let you know what I find.