Anyone try these levers yet?

[Bungle]

I don't get it - their ad that always shows up in the sidebar in this forum shows $42, but I can only find $62 levers on their site.

Also, I'm pretty sure these are the same as the Fire Dragon Bros. levers, which I've used and are well-made and definitely worth the money.

 

[mikehoden]

you are lucky enought, my suggestion:stay away from ebay levers, alway having fitment problem also fade fast....

 

[Bungle]

@mikehoden: You're right, in general. I bought a set of eBay OEM-style black "powdercoated" levers for an SV650 that I owned, and the coating lasted about 2 months before it was almost gone. I didn't have any problems with fitment, but they looked like crap very quickly.

These FDB levers (and I assume the RideItMoto ones, which look identical) seem to be an exception to the rule, though. They're made very well, look great, and are legitimately anodized, not painted or poorly powdercoated. I've had a set on my GSX-R600 for about 6 months and they've been great - no fading, and they installed with no problems at all. My only minor complaint would be that they have a little extra vertical play compared to the OEMs, but it's slight and is only noticeable when you're actually wiggling them up and down on purpose. They feel much better than the stock levers and the adjustment works fine, too.

 

[Agate]

I was looking at same levers and think im going with RIZOMA.Just like everything in life you get what you pay for!!Goodluck!

 

[Shreve]

Check ebay.....
http://cgi.ebay.com/ebaymotors/ws/e...0519817208&viewitem=&sspagename=STRK:MEWAX:IT
or the one you are looking at
http://cgi.ebay.com/ebaymotors/ws/e...0519852299&viewitem=&sspagename=STRK:MEWAX:IT

 

[Jobe Zeebuh]

I have heard great review on theses levers. I just chopped my stock levers. (Im cheap) I couldnt justifiey paying $200+ for levers tho unless they made me fly. RIDEIT...big one [up]

 

[JohnnyD]

I was looking at same levers and think im going with RIZOMA.Just like everything in life you get what you pay for!!

Please post a review when you purchase the Rizoma's. I looked at buying those also, but couldn't justify the price for a set ($409 without shipping). Found them cheaper on eBay for $399 with free shipping. At five times the price I paid for these, I'm happy. Now, are the Rizoma's worth the extra $320? I don't know since I haven't seen a set to compare.

Then again, the Rizoma's might be worth more. But, sometimes you might be paying just for the name.

After a season of riding, I'll report back on RideIT ones...

 

[jasoncummings64]

pazzo shorties. pick the color combo. 180 for the pair. bolt right in. adjustable. awesome.

 

[Raisingicarus]

I just got my set of Rideitmoto double adjustable levers and really like them. Quality is good and had no problems installing them.

 

[Jobe Zeebuh]

^^^looks clean and nice. I think I found my next levers.

 

[onelogue]

I have heard great review on theses levers. I just chopped my stock levers. (Im cheap) I couldnt justifiey paying $200+ for levers tho unless they made me fly. RIDEIT...big one

^^^looks clean and nice. I think I found my next levers.

And how do you plan on getting them for less? Change of heart? Tired of the chopped stock levers?

 

[anrkizm95]

i ordered these levers mainly to do a review on them.here's my take rideit moto single adjustable levers.ordered black with black adjusters recieved black with red.clutch lever is a lot sloppier than stock due to bolt hole on the adaptor being to big and adaptor tab being to thin for the perch.both of these problems result in a lot of play.fix is shim adaptor at the perch with a buell nylon body washer.result about the same amount of play as stock maybe a little less.the brake lever adaptor is to thick for the perch it can be installed but brake does not disengage.fix dremel the adaptor remove approx 1/32.result nice tight brake lever with no problems.sent emails to all 3 of rideitmotos address over 4 days asking for an exchange and then refund.i have still gotten no reply.as far as the levers go after mods they look great with no improvement over stock function.

 

[jasoncummings64]

my pazzos fit with no adjustment, why do u want to pay almost two hundred more dollars for DOUBLE adjustability, u either prefer stock length, or you prefer shorty! wtd? two hundred AND some modification to make it work, now thats just ridiculous, RAISING ICARUS, those d3 alumitechs are badass! i have the limited edition white ones i bought the same time as my pazzos, the larger diameter grip means less rotaion for more throttle, i LOVE it!! bolt on imaginary torque is awesome.

 

[anrkizm95]

they were 76.00 with free grips.my asv levers will be going back on.

 

[jasoncummings64]

i made a mistake, pulled a chick move and just skimmed and thought i knew what i was talking about. the four hundred was for the adjustable, yours were non extendable.. adjustable needed modification and cheaper . sorry. im an a$$hole.

 

[Raisingicarus]

My levers feel perfectly fine as is, no extra play and no mods required. Curious if they sent you the correct ones initially.

 

[anrkizm95]

rideit has responded.said i must have gotten a bad set.they are sending the black adjusters.

 

[Nuage420b]

sent them a email about a forum discount here is what i got back
Good Day!
Thanks for your mail.
we do offer discount for the forum members.
Here is the coupon code of 5% discount: 5PCDS
Hope to have order from you soon.
Best Regards
Tim

So i felt froggy and thought well if 5PCDS is short for 5 PerCent DiScount why not try 10PCDS or 15PCDS Well $70.30 using 15PCDS[up]

 

[Fasemask]

My crg levers look very similar. Same adjuster lever. They are great

 

[Nuage420b]

ok well i jsut tried to order me a set for the second time now and i keep having issues when it comes time to paypal. it either lags out or it said something about requesting an outdated version of paypal. I dunno it was enough to turn me away from them.

Anarkizm or anyone else who is ditching them for the pazzo's or other brands lemme know how much youw ant for yours?