buell 2009 problem with engine

Buellxb Forum

Help Support Buellxb Forum:

rkadlcek

Well-known member
Joined
Jun 20, 2011
Messages
91
Hey guys I have a question for you technically do not know what my 2009 Buell dying between 4000-5000 but it has a rotational speed of fall quite large and I do not have to reset it lends itself both in terms of screw 09 is not setting the TPS and lambda probe because I can not connect it again so I blblo that leaves the option to either play the maps but I have a race drive, and I fear that when you blow it up then it can never be together because no one lends or 09 does not have to sell it and buy or older and do not know if it's there because I could not find it anywhere and it is to buy and race tuned exhaust unit directly to :-( I also tried iridium plugs and pricpat little exhaust and it did not help the Buell forum and can not do so well in English to explain to someone if you happen to Mels any ideas please write thanks Bye
 
I think I speak for most here, when I say...what?! From your post, I'm guessing you might be from a non-english speaking country, but I don't understand. From what I could understand, the bike is dieing at 4-5k and you are wondering how to tune the ecm with certain plug/exhaust configurations. I might be way off base, but let me know if I'm on the right avenue. If so, I'd be glad to help!
 
Alpha
Hi guys im from Czech Republic I have a question my Buell 2009 (I have cut off exhaust) died between 4000-5000rpm, 09 Buell does not have a set of TPS 07 (and I have a race ecm) and lambda probe must be disconnected because the connected motor dies after starting , how to solve it?, a remake of the map?, but here in cz no one to help me. or buy a tuned exhaust with race ecm? :-(
 

Latest posts

Back
Top