Buell xb gauge cluster speedo

[RuiP]

Got it in a trade and don't need it. Plugged it in when I got it to test it and can verify everything works. It has 2500 miles give or take a few but I will plug it in to get actual mileage. Shoot me an offer.

 

[RuiP]

It's for an xb12s. Also have an xb12r gauge face.

 

[QtheBuelligan]

PM sent

 

[QtheBuelligan]

Another PM sent

 

[EricZ]

What year is it from? 2003-2005 clusters have different speedo programming than 2006-2010 speedos

 

[RuiP]

Hey Eric not sure of the year as I got it in a trade. Are you absolutely positive on the different speedo programming? I plugged this cluster in and rode with it and everything checked out including the speedo.

 

[EricZ]

Yup. I have encountered the issue several times. The 2006+ transmission has a different tooth count where the speedo sensor reads so the speedometer is calibrated for the different tooth count.

 

[EricZ]

The speedo will plug in and work. The speed will be off if the speedo year doesnt match the transmission in the bike (and stock final drive ratio)

 

[buellxb9rs]

2005:
Final Drive Ratio
2.41
Gear Ratio (1)
2.69
Gear Ratio (2)
1.85
Gear Ratio (3)
1.43
Gear Ratio (4)
1.18
Gear Ratio (5)
1


2007:
Final Drive Ratio
2.41
Gear Ratio (1)
2.65
Gear Ratio (2)
1.89
Gear Ratio (3)
1.41
Gear Ratio (4)
1.17
Gear Ratio (5)
1

 

[EricZ]

The gear ratios do not matter. The speedo sensor reads the main output gear, which turns the same as the pulley (they are directly connected).

 

[RuiP]

Sold!