Buell XBRR cam time

[stevie1340]

Hi everybody,

just would like to asking as where i find the cam times for XBRR?
thanks,

 

[Chicknstripn]

https://youtu.be/2epTWjP5rfg

Try using the above as a guide.
The process is the same for an XBR or XBS, however, I have no idea about an RR.
The XBRR is a rare machine.

Good luck

 

[konarider94]

check out this thread on building an XBRR engine, or are you just looking for cam timing, lift, duration?
http://xlforum.net/forums/showthread.php?t=829935

 

[stevie1340]

thanks for help.i onnly looking for cam times,lift,duration etc...

 

[stevie1340]

sorry if you dont understood what means that "word" as cam times...cam times is not ignition time...cam times is camshaft times...and i only asked,maybe anyone know that,thats all,if not no problem,i dont know Danny Hurda unfortunately,i'm european..

 

[Chicknstripn]

Then check out twinmotos out of the Neatherlands. They did an XBRR build a while back.
If this link, https://www.twinmotorcycles.nl/webshop/index.asp?mc=1, doesn’t work google search them.

On XBS and XBR bikes the cams are as lunatic stated and can only be installed one way. Thus I would imagine there is no way to “set” cam timing. Unless the cams are changed to a different lift/duration type. Even then the cams can only be installed one way and the ignition timing is set off those cams.

Either way, sounds like your question is beyond my level of expertise.
You definitely need to reach out to a Buell specific engine builder.

 

[konarider94]

What do you plan to do with the information? There are aftermarket cams available for regular XB engines already. Trying to duplicate the RR specs on a different bike isnt the same. They have huge valves and different port/combustion chamber geometry.

 

[Silverrider]

You might want to ask this Guy .
https://www.ebay.com/itm/2006-Buell...vip=true&rt=nc&_trksid=p2047675.m43663.l10137

 

[Chicknstripn]

You might want to ask this Guy .
https://www.ebay.com/itm/2006-Buell...vip=true&rt=nc&_trksid=p2047675.m43663.l10137

Man! Really hope that guy isn’t parting out an RR.
That would be a dam shame!

And yes, I just looked at the auction, did not read any info.

Who in the hell reads these days to gain information! Sheesh

 

[wickedchop]

^^^^^ lol....He isn't parting out an RR. He builds those motors. He always has them on eBay for sale. You should buy one Carlos.

 

[Chicknstripn]

If I knew how to tune one, I would. No sense having something that will never see it’s full potential.

And that was an excellent suggestion for a point of contact regarding “cam timing”.

 

[stevie1340]

i talked with him already,he also dont know