buellxb breather mod fail

[nativeXb12Rbuell]

When you removed old hoses or when you ran the new hose for breather and catch can di you move idle cable or possibly turn it or drop something on tps sensor bracket and screws or did you drop something into intake like paper towels or rags in intake. You eed to double check everything and double check the instrustions you followed make sure you did it rigt and didnt cut a wire or pull a wire out or something like that.

 

[J_Undisputed]

I agree with Native. Check to make sure you didn't leave something in the throttle body or that the servo cable is not caught between the frame/airbox bottom or something else that keeps it from moving freely. Also make sure the Airbox bottom was installed between the seal around the throttle body.

 

[bushbuell]

Yea, during the routing of.the hoses, it rubbed on the front spark plug wire and barely pulled it off of the coil. Plugged in, runs like a champ! Rookie/ ******* move, attention to detail lol. Thanks all for helping.

 

[RuiP]

[up]