Cat Eye turn signal connections

[jammer84_03]

Well, I got two pair of cat eye turn signals til I come up with something better.

Got them installed, then I went to hook up the connectors,andthat was a no go. Anyone know where I can get the proper male ends to plug into the factory harness?

 

[Miami78]

Radio Shack, bullet connectors. They sell them by the bag, and they are cheap.

 

[jammer84_03]

Thats what I figured, didnt know if there was a propritary connector or not. thanks

 

[krillin99]

for me, i used a screwdriver to spread open the connector a bit. Widening it helped it to fit snug into the buell's connectors. I then used electrical tape and taped it all up.

 

[dave_xb12r]

I made adapters by cutting the butts off of the stock blinkers.

 

[oh9bolt]

I did the same thing as dave. [up]