Clutch cover gasket?

[Baal]

Okay, I'll probably have it installed and done before I hear, but which way does the gasket go on? The surface is concave on one side, and convex on the other. I figure the concave side goes inboard, and the convex toward the clutch inspection cover. Anybody know for sure? Tx!

 

[MotoPhreke]

I don't think you can put it on wrong, unless you force it.. The holes are just offset enough to know it won't fit right if you're doing it wrong..

 

[JOEL9]

The gasket will only go on one way, the top hole will be off if it's on backwards. line it up on the cover and you'll see.

 

[Baal]

Ups to MotoPhreke and JOEL9 for being smarter than me! [smirk] I discovered that it only fits one way once I actually looked at it. Silly me for asking first. BTW, it's concave OUT, for future callers. [cool]

Thanks!

 

[user_deleted]

and the concave or flare to the gasket mating surface is the crush zone...it will flatten and expand when installed and torqued down.