• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

code 53

Buellxb Forum

Help Support Buellxb Forum:

bronjeremy

Well-known member
Joined
Sep 25, 2009
Messages
108
I believe this means its time for my ecu to hit the grave... but i have an 07 xb12r jardine pipe, airbox mod, headers wrapped, breather mod....

bike ran fine after i tuned it all last fall and this spring...friday night at the drag strip randomly died on me had some loose connections...and now when i start it up some times the check enginge light stays on for a bit... and hooked it up today and found this code...

question 1. Does this really mean my ecu is toast or could there be any other problems???

question 2. i have a race ecu laying around but do not know what its from??? anyway of finding that out and seeing if i can just put that on my bike and load the 07 race map to it???


Thanks any help is much appreciated!!
 
Code No. Fault Condition
11 Throttle position sensor
13 Oxygen sensor
14 Engine temperature sensor
15 Intake air temperature sensor
16 Battery voltage
23 Front fuel injector
24 Front ignition coil
25 Rear ignition coil
32 Rear fuel injector
33 Fuel pump
35 Tachometer
44 Bank angle sensor
52, 53, 54, 55 ECM failure
56 Cam sync failure diag manual troubleshooting has nothing for this code except replace ecm.
 
yeah i know i have the manual and that is what it said just wanted more input... does anyone know how to tell what a ecu came out of because like i said i have a race ecu but i do not know what it came out of... :[
 
ECMSpy - Put it in your bike and Connect to it. Then you can see the firmware and know exactly what year the ECM is for.
 
4905_20110613115356_L.jpg
4905_20110613115330_L.jpg



i found the extra ecu i had and was wondering if anyone could tell me what its from i would pull my bike apart and plug it in but i do not have the time at the moment... thanks
 
That ECM is for '04 only. Don't know if it will work properly in an '07. Try it and let us know.
 
I just had this exact same thing happen with the same code! It was only a history code. Cleared and have ridden a few times without any problems. I am worried it means the ECU is on its way out.
 
well mine comes on every time i start it up... runs and idles just fine tell light comes on and then dies.... check enginge light goes away and bike runs like complete shit tell it feels like it wants to run okay again and then runs great tell it wants to run like shit again... ugh.... so does this meany anyone wanna buy an 04 ecu off me so i can buy an ecu for my 07???? and this ecu i know wont work it has a male connector between the two plug-ins for something that i know my bike does not have?? if its just a ground i can make one of those anyone else have any other wisdom to share with me?
 
Just to let everyone know that race ecu i posted pictures of is in my bike and running right now and i just put the 07 race e prom on it..... everything working smoothly! and it seems to have solved my poor running issue!
 
Back
Top