-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
Do i have use for this Ignition coil and Ecm on my bike?
- Thread starter jdaniels
- Start date
Help Support Buellxb Forum:
34nineteen
Well-known member
The ECM is different and will not work at all. The coil and wires should transfer over, but why would you reuse a set of ignition wires?
So, you have an extra coil. Hopefully you tested it to make sure its still in spec.
PRO TIP: If it tests OK, be sure to put a large "X" on it so you don't mix it up with a suspected bad coil. :black_eyed:
So, you have an extra coil. Hopefully you tested it to make sure its still in spec.
PRO TIP: If it tests OK, be sure to put a large "X" on it so you don't mix it up with a suspected bad coil. :black_eyed:
Cooter
Well-known member
And don't turn the ignition on when testing that coil with the X on it. That same idiot shocked the Hell out of himself!
