Dyno Day

[vance580]

Went to a dyno day today with my CR. Here is a video of the pull in case anyone wants to hear what a Barker sounds like in an enclosed area.

http://www.youtube.com/watch?v=kuAMYXv0CH8&feature=share

 

[d_adams]

Nice flames! I like that, I've had the same happen on mine.

 

[Sirius815]

Man your afr's look smooth! I'm assuming these were done with no RPM signal.

 

[vance580]

Thanks the flames were pretty sweet. I never get to see them since I'm riding and I am usually riding alone or behind someone else leading so never knew they shot out till today. After I finish putting my XB back together hopefully that will have a little flaming action too.

There was an RPM signal after they found it since the wiring was under the seat after they removed the seat they were able to get RPM. It has a EBR Race ECM tuned for the exhaust and K&N so it seems to have a really good tune. My friend was up there with an 1125R and his A/F was hovering in the high 12's and he has the same mods except his tune is different. He is gonna take his back to have them tune it up so he can be closer to where I was. He hit 129HP and 71 ft/lbs which is from his A/F so he should be pretty identical to me once he gets that done.

 

[d_adams]

12.5 to 12.8 is a good target afr for the 1125. I'd also suggest strapping the bike down to keep it loaded on the drum properly.

 

[Sirius815]

Sounds about right for your friend.

 

[vance580]

It was chocked and strapped on the front. Since it was a dyno day he just put his weight on it for the pulls. No one was getting tuning since there was no time. We just met up there to get some numbers. He also ran it before doing pulls to make sure the bike was tracked right so it didnt move side to side. He wasn't able to sit on mine to good since the seat was actually removed to get to the RPM tie in so he had the wiring all ran there. There were two BMW S1000RR's up there with our group. Both stock and laid down a 171 and 168 with 75 ft/lbs. Those things are sick bikes. Probably the only inline bike I would ever consider.

 

[tyler]

129 vs 171 boy did we get screwed[sad][down]get me the parts to make a 1190 motor where are they its been 4 years......

 

[vance580]

You can get two 1125's thought for what you would pay for a 2012 S1000RR and have more power then. I've rode the BMW and would never replace a Buell with it but it would be fun to own. They are very uncomfortable for everyday riding but for an occasional ride or tracks they would be fun.

 

[Litos]

171hp bikes - sweet god

now i really wish i could get an exhaust and tune for my bike...

 

[doolay1988]

Kickass run bro, and the flames... yeah, I think everyone already said enough. lol Sounds good!

 

[STL XB12Ss]

badass! [up][up]

 

[vance580]

Thanks for the comments.

 

[vtech007]

Sounds remarkable on headphones. Good on ya.