Ebay Wheel Bearings

[ali]

Plus completely different part numbers

 

[RT Performance]

they look close to the right ones.

Defintly dont need those seals lol

 

[ali]

they look close to the right ones.

Defintly dont need those seals lol

They were thinner compared to the stock ones

 

[turboraven]

I just remember thinking "what the heck" when they arrived cause they said they were for something completely different but they fit and work just fine. Of course I didn't try to use the dust seals.

 

[ali]

I just remember thinking "what the heck" when they arrived cause they said they were for something completely different but they fit and work just fine.  Of course I didn't try to use the dust seals.

If they didn't replace them for free I would of tired it, but since they did I'll wait until the new ones come in and see how they look

 

[RT Performance]

they need to be the right width and diameter.
keep us posted

 

[ali]

A week later got the correct bearings from Allballs

Front

Rear

Now if I can get my damn wheels back from the powdercoater

 

[turboraven]

Yeah, those look about right.

 

[g3STRIKES]

cheap bearings are not all bad but they do need to be repacked,using small pick remove seals they pop out,repack with belray waterproof grease and reinstall seals. they will last along time, u will be surprised how little grease comes in these cheap bearings,that being said i would get the name brand bearings if possible hope this helps

 

[netty2424]

Ali, looks like you should get back to work! There are spreadsheets that need tending too! Lots of red in those sheets!

Let us know how the bearing install goes. Maybe something I'll do when I change my sprockets out.

 

[ali]

Ali, looks like you should get back to work! There are spreadsheets that need tending too! Lots of red in those sheets!

Let us know how the bearing install goes. Maybe something I'll do when I change my sprockets out.

Lol it is impossible to make all of the "reds" go a way, we cant get raw parts or just cant get finished parts out the door never ending headache lol

However the bearing worked great! really happy with them

 

[chelch]

so that ebay link is still bad???

 

[ali]

I don't know, but if it is still up I wouldn't go with them again

 

[fireinxb]

I've got the "all balls" wheel bearings off ebay and I'm running them front and rear. I've got maybe 2k miles on them and they still feel very smooth an solid, i just had the wheel off yesterday to work on my brakes and checked them. So far so good.

As was mentioned here already, they WONT say "buell blah blah" on the package, i believe the ones i were for an ATV in the back and a KTM in the front, or something like that I dont remember. Either way they pressed right in and seem like they are genuinely decent quality. So far i'd 100% say i would go with them again.