• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

EBR ECM Install 09 XB12R

Buellxb Forum

Help Support Buellxb Forum:

its behind the fairing in front kind of like between the headlights. Pop the mirrors off and turn signals and the two bottom screws in the windshield. its bolted in by two bolts and connected with two big connectors. Im not 100% sure on a tps reset, ill let someone else chime in with that one
 
No problem I just swapped ECMs out on an 03 bolt 9R. pretty much the same process, takes some time that's about it. Id say its about a three beer job lol. good luck, and don't accidentally drop the mirrors...........
 
'08+ TPS Reset Procedure:

- Turn on the key.

- Set the kill switch to the run position.

- Don’t start the engine. Rotate the throttle from fully closed (gently forced closed) to fully open (gently held open), and then back again to closed (gently forced closed).

- Repeat 3 times. Hold each position (fully open, fully closed) for 1 full second.

- Turn the key off and on.
 
Back
Top