mikek2111987
Well-known member
- Joined
- May 10, 2015
- Messages
- 101
So i have an 07 xb12 with d&d pipes and open airbox, i'm no tuning wizard but i read everything and understand how it works. I took a download file someone on here made for an 09 with the same mods, hoping it would give me a good start, and the thing is way off. See the picture of the fuel tables below, my current one i used from the download on the left, and the one on the right is for a micron for comparison (I think from the ecmspy creator, not sure if airbox is modded)
After riding around trying to keep it in closed loop, i came back to the garage at 86 AFV. It idled ok but then gave it a little gas and it would struggle and stall, with a poof of smoke out the intake, so in other words does not run well.
My question, what is the best way to approach this? Lean out every cell a couple points? 10 points on the problematic areas? How do these tables look, is it really as rich as it appears?
After riding around trying to keep it in closed loop, i came back to the garage at 86 AFV. It idled ok but then gave it a little gas and it would struggle and stall, with a poof of smoke out the intake, so in other words does not run well.
My question, what is the best way to approach this? Lean out every cell a couple points? 10 points on the problematic areas? How do these tables look, is it really as rich as it appears?
