Final for sale thread

[jakestolar]

All PM's replied[up]

 

[jakestolar]

pictures as promised

I have right and left. Left is slightly bent inwards

Right side only bent in by about 1/4 in

These rear sets are straight

 

[Lando]

do you know if that belt will fit an 08 XB12SCG?

If so, i'll take it!

 

[jakestolar]

SCG is the lowered S right? If so yes. But you're currently third in line right now. If others pass it up I will let you know

 

[svdemasi]

PM'd you for the double-bubble wind screen if still available, thanks!

 

[nikfleisch]

WINDSCREEN-SOLD

(he just pm'd me that)

 

[jakestolar]

I have remaining:
These are the pictures I have all are available upon request.
Wire Harness Will cut off any pig tail you want(05R)
Race ECM (05)
Oil lines (05)
oil cooler cover(09)
Brake rotor (Front 09 2500 miles)
5-0 dro pully cover
Front tubular support
both motor mounts
Ton of bolts
09 S swing arm
rear shock
Double bubble blue wind screen (pending)
A lot of turn signals
Belt with 2500 miles slight rubbing wear. perfectly fine (pending)
oil pump
kick stand
tranny
crank
both halves of the case
Front rotor and pads (off an 09 with 2500 miles)
Stator (05)
VR (05)
2 pulley covers (factory)

 

[wolfo68]

how much do you want for the oil lines and the tranny?

 

[jakestolar]

All parts paid for will ship tomorrow. turns out a lot of places close for veterans day?

 

[pontlee77]

how much for the fornt rotor shipped to texas 79103?

 

[jakestolar]

All parts shipped

 

[jakestolar]

I have remaining:
These are the pictures I have all are available upon request.
Wire Harness Will cut off any pig tail you want(05R)
Race ECM (05)
Oil lines (05)
oil cooler cover(09)
5-0 dro pully cover
Front tubular support
Ton of bolts
09 S swing arm
rear shock
A lot of turn signals
oil pump
kick stand
tranny
crank
both halves of the case
Stator (05)
VR (05)
2 pulley covers (factory)
Daytona tuner

 

[RT Performance]

is the ecm a 12 or 9?

 

[wolfo68]

bike was a 12r

 

[vaxb12r]

How much for the 5-0 pulley cover?

 

[jakestolar]

is the ecm a 12 or 9?

For a 12

How much for the 5-0 pulley cover?

$75 shipped

 

[50dro]

I'm not sure how bad that scratch is but I've found that a black Sharpie hides small imperfections pretty well. If whoever picks it up needs any help have a look at the instructions on my site or feel free to PM me directly if I can help.

Jake is a good dude! Feel confident in buying his stuff! I've had good experiences on both sides of the sale.[up]

 

[jakestolar]

To all I will be out of touch until wednesday. yay... So anyways keep that in mind if you want something!
To the few guys who bought something this weekend I will have the woman ship them out tomorrow.
Thanks!

 

[jakestolar]

bump

 

[dave_xb12r]

Got my screws and pads, Thanks!