• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

FINALLY!

Buellxb Forum

Help Support Buellxb Forum:

sparky300

Well-known member
Joined
Jan 30, 2012
Messages
935
Location
The Duke City
Found one after a long search but it's mine now.

15k miles, mostly original and pretty well taken care of. Now just to get it home!

IMG_20150425_095259036_HDR_zps9frdenra.jpg
 
Thx Dean and Robin, I definitely need to go through it and check it over. Got it home today. The isolators look good and belt tension is about right, but the shock is done and needs a rebuild. I need to tune the carb for the elevation difference (5000 ft here) as its def running rich.

DSC_0486_zps62co5auw.jpg


DSC_0488_zpsryfq9xxm.jpg
 
The best way I found to adjust the belt is to use a motorcycle tie down and a straight edge. On my X1 remove the seat run the strap over the subframe and fasten to both sides of the swingarm. Tighten the strap until the axel swingarm pivot and center of countershaft are aligned. That will be the tightest the belt will get in the travel of the wheel. I give it a little less than 1 in. at that point. It will be what others call scary loose after the strap is removed and no weight on the bike but you wont be replacing the countershaft bearings at 20 thousand miles.
 
Very cool, thanks, I'll give it a shot. So that's close to rear max compression with around 3/4" deflection in the belt at that point?

While we're at it, anyone care to comment on a preference of shock choice? Penske, Works? I'm positive I won't be rebuilding the stocker. I'm leaning toward the 8983 for street use, although I admit that I don't know exactly why. I will most definitely NOT be tracking this bike but would still like full adjustability.
 
Back
Top