Frame Puck Help

[Somthngfrce]

So after listening to all the good things everyone says on here about frame pucks, I drive down to Seminole Harley Buell near Orlando and i purchase frame pucks. I followed directions to the T from what the Service Tech. told me. I got the right side, but unfortunately the adhesive on the other one doesn't want to hold and so I have found it twice on the ground.. I want to exchange the one for another. I don't know if they will take it back. Does anyone have any advice OR know of car trim adhesive out there? The stuff at the parts store is not as strong as some that's out there for body shops. Help!

 

[BuellPartsGuy]

Personally, if you came to me at the parts counter and were completely honest, I would warranty one for you. Obviously it has been on the shelf for a while and the adhesive is past its prime. Rather than taking the one off your bike, they can take one out of a new package, give you a new left one, and warranty the package that the gave you the new left out of by placing your problematic one in there. I do this stuff all the time, but it just depends on how far your parts department wants to go above and beyond for.

Let me know if you have any problems at all

 

[Somthngfrce]

Well, glad you would do that for someone, because they didn't offer. I ended up going to a body shop and got some 3M molding adhesive.