Frame side rubber!?

[corkysharp]

Hello all, plz help I need to remove and replace the side rubber that protecks the frame on my xb12STT 2007 super TT. I Can not see how this is removed and the gang at the deler dont know either.

Sorry I don't spell well "dislecticks untie"
Thanks again gang.
Corky

 

[BuellPartsGuy]

They are called Frame Pucks. They are double sided taped to the frame. You can replace just one. Let me know what side you need and I will give you the correct part number.

Left - M0028.1AKA
29.95/EACH
Right - M0029.1AKA

 

[Somthngfrce]

Ok, just saying... I know this is serious info however AND I QUOTE:"Sorry I don't spell well "dislecticks untie" " is one of the funniest things I have read..lmao

 

[corkysharp]

Thanks dude, its the left side, Can I order it on line or do I have to get it from the dealer?
And a side note this is a cool site!!!


Well thanks again gang!!!
Corky.[up]

 

[BuellPartsGuy]

Probably dealer only....

 

[nativeXb12Rbuell]

You need isopropyl rubbing alcohol to remove them just apply to the edges and carefully pull it off with your finger or a nylon pry tool . DONT use a knife or screwdriver or a putty knife as you will scratch your paint all up all around the frame puck . the new frame pucks come in pairs only ( so I've been told).it comes with instructions (and 3M prime) on how to remove them and properly put the new one on .

 

[BuellPartsGuy]

Yes the new ones come in sets, but that is when you buy them as an accessory add on. The part numbers listed here are single sides. They are from the hard parts catalog. Same but different.

 

[corkysharp]

Cool! thanks guys I will pick them up as soon as i can.

Thanks again,
Corky