• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

front left blinker not working

Buellxb Forum

Help Support Buellxb Forum:

RedSphinxy

New member
Joined
Aug 19, 2012
Messages
3
I recently dropped my 'o4 Blast and the front left turn signal was destroyed. I replaced the signal, but it still isn't working. The signal itself is fine, I plugged it into the opposite bullet plug to make sure it wasn't an issue with the new part. All the other turn signals work completely normally. Any ideas of what could be wrong to only make one signal stop? If it was the flasher wouldn't all the signals stop working?
 
The bulb was brand new, but I did check it. The turn signal works fine when plugged into the bullet plug for the right turn signal. It just doesn't work when plugged into the left turn bullet plug.
 
Do you think I can rule out the flasher being broken because it still makes the clicky noise and the other signals work fine? I just want to rule it out before I start tearing into the wires
 
Got the same issue, difference is the bike hasn't been laid down. It started intermittently, when i sometimes would make a left turn i would notice the left turn signal in the front would stop working, the indicator on the speed o would click 2X faster then normal....... this went on for a while hit and miss never consistent until finally it just stopped blinking at all in the front. replaced bulb. nothing....

Any suggestions??
Thanks
 
Same thing happened to mine. Wire connector pulled free. Or you might have pinched the wire ...
 
Back
Top