Help finding Banjo bolts

[stamen]

Any suggestions on where to purchase a banjo bolt + copper washers for the front brake line where it mounts to the caliper. Tried asb.com buellparts.net but nothing, I did find two links on buellsterparts.com but couldn't find a phone number so I can't call and confirm if one of those are the exact bolt I need.

http://www.buellsterparts.com/product.sc?productId=1638&categoryId=19
http://www.buellsterparts.com/product.sc?productId=1639&categoryId=19

Thanks [up]

 

[stamen]

edit: Also does anybody know the size and thread of the bolt?

 

[stamen]

edit 2: well figured out the thread is M10x1.25 does anybody know if these will work.

http://stores.sportbiketrackgear.com/Detail.bok?no=901

 

[stamen]

edit 2: well figured out the thread is M10x1.25 does anybody know if these will work.

http://stores.sportbiketrackgear.com/Detail.bok?no=901

 

[buellfighter]

If the hole is in the same spot then they will work just fine. if the hike is too high or to low on the shaft then bi they won't. visually they look like they will work.

 

[sparky300]

In your choice of colors

 

[user_deleted]

stamen: stock is a nissin master cylinder. same bolt used on suzuki and yamaha nissin master cylinders for most all gsx-r, ninja 6r, ninja 500, yamaha virago models from 2000 and up.

 

[TPEHAK]

So I believe this M10 crush-washer should work? https://www.amazon.com/Earls-177101ERL-Copper-Crush-Washers/dp/B000M0DIUM

 

[Cooter]

Yep. But might be easier to pay 4.99 for the whole copper crush washer kit from Harbor Freight.