Help with installing exhaust

[snareman96]

I bought a used Jardine RT1 exhaust and need some type of instructions on installing it on my Firebolt. I've looked on the Jardine site for some help and got nothing. I found one on this forum, but forgot to bookmark it and now cannot find it. Any help would be great. I don't want to go in on this blind and screw something up. Thanks again fellow Buellers.

 

[klan52]

instructions pdf

that should do it for ya, any other questions just ask

 

[brisbon]

No need to remove the belt tensioner or loosen the rear axle to get at the rear straps dont waste ur time just use a long extension

 

[brisbon]

When putting the rear straps back slide them back over the oil lines put the nuts on loosely then once the mufflers back on you can tighten them again with the 1/4" drive extension

 

[Midnight82]

Depending on who put the strap on last you MIGHT have to pull the belt tensioner off.

I had to take mine off to get to mine.

 

[brisbon]

yeah just look through the tensioner if you can get a deep socket on the nuts with a extension your golden, saves you about an hour or so.

 

[snareman96]

thanks a lot guys for the help. I greatly appreciate it!

 

[snareman96]

By any chance did any of you guys have a video of your installation? I'm also missing some parts like all the screws, left bracket, and tension ring that connects the s-bent to the headers. Any other suggestions would be great. Thanks again guys.

 

[kalifornia]

how do you book mark something[confused]