HID / dual head light wiring

[breeves]

I am looking into this mod for my bike. I personally don't like the fact you have to use flash switch. So without knowing all the schematics of the multifunction switch, I came up with this schematic.

Can somebody look this over and let me know if this would work?

 

[breeves]

HID's are on the way. When i get them i will report on this.

 

[Sirius815]

You can avoid the third relay on the right by letting the high beam switch go into the low beam relay, but you'd have to put in a diode so that you don't trip the high beam relay with the low beam switch.

 

[VT2MA]

http://www.buellxb.com/Buell-XB-Forum/Buell-Lightning-XB12S-XB12Ss-CityX-XB12Scg/HID-Time-Delay-Mod

I also made a vid on how to install with the timer relay. Youtube's blocked at work, but just search buell hid install and it should come up.

 

[breeves]

I dont have any diodes handy nor do i know how to calculate the correct size needed. What i do have is several relays handy. Thanks for the heads up, i will look into it.

 

[Ailen Xb9]

 

[viji88]

@VT2MA

just use proxy sites. Try proxies like from http://proxy-zone.net or add https before the link.. )