HID issue

Buellxb Forum

Help Support Buellxb Forum:

jdbell

New member
Joined
Mar 6, 2013
Messages
1
I recently installed a HID kits for high and low beam. When starting the low beam light will not turn on unless i key the key a little forward and back to run then it will turn on. Is there something i can do to fix this?
 
i had a wire under my ignition switch that got pinched and shorted my lights and i had to jiggle the key to get it to reconnect but idk man I'd pop the ignition cap off and check the wires for safe measure.
 
Double check your wiring if you just got dobe installing them. I would recommend running a switch for the low beam, less bragging rights than a relay but its clean and simple. I mounted mine on the fairing stay. It'll take a load off your charging system and probably fix your problem.
 
Back
Top