S stensg Well-known member Joined May 12, 2012 Messages 996 Sep 5, 2012 #1 What's the best way to remove the plastic in the front that goes around the gas neck? I want to be able to attach it again what's the best way?
What's the best way to remove the plastic in the front that goes around the gas neck? I want to be able to attach it again what's the best way?
F freak2180 Well-known member Joined Mar 24, 2010 Messages 2,625 Sep 5, 2012 #2 Heat or cut the lil plastic tabs that hold it in place. To re attach it just use plasti weld.
W wolfo68 Well-known member Joined Sep 14, 2010 Messages 4,304 Sep 6, 2012 #3 I don't remember what manual it was in, but it said to use something like a plastic welder to melt those tabs and just pull it off.
I don't remember what manual it was in, but it said to use something like a plastic welder to melt those tabs and just pull it off.
O owlmeat Well-known member Joined Mar 4, 2011 Messages 58 Sep 6, 2012 #4 I used a die grinder to grind off the melted part until the ring popped loose. I then mechanically attached the ring with some button heads screws.
I used a die grinder to grind off the melted part until the ring popped loose. I then mechanically attached the ring with some button heads screws.
R redrider Well-known member Joined Apr 30, 2010 Messages 669 Sep 6, 2012 #5 I used a dremel to remove it. then used hot glue gun to reinstall it.
Motorcycle For Sale Trade old harley for buell
