Identification of tail lights. Help please.

[John422]

So I bought this not knowing what they were, just that it's led and has clear lens and I needed some other parts he had so I said what the hell and bought tail light too. And so i dont know what it is but I'm thinking it's a xblights.com from the grid pattern but I haven't had a.chance to plug it in yet but it looks like option 5. But then again of course I would think I have the light iv always wanted. So this is so long. But ya can someone identify what lights these are.

 

[rah7777777]

Not XB Lights.

Pretty sure that's the Heavy Cycles light from ASB.
Expensive light. I think $355 is what it used to go for.

That is the only other light I would recomend with the XB Lights unit.

 

[John422]

I can't find any pictures of one ASB doesn't sell them anymore.

 

[wolfo68]

can you take a pic of the back of the board?

 

[John422]

No it's glued it. I don't want to remove it. Might snap the board

 

[John422]

No it's glued it. I don't want to remove it. Might snap the board

 

[John422]

Any one have a picture of the ASB grams light. The one they don't sell anymore?

 

[thrstrmech]

are you speaking of this one here

 

[rah7777777]

No that's the factory 2010 buell light linked above.

The one I referenced was made by Heavy Cycles.

ASB used to have them...... Guess he stopped carrying them.

It's the only other light I know of that uses a good amount of the superflux LEDs.

I've never seen one in person. I would love to see how it compares to the brightness of the XB Lights.

 

[John422]

Ya I'm going home from hunting tomorrow. So I'll try it then and see how bright it is. It has built in blinkers too.

 

[John422]

I plugged the light in today! It was awesome. Crazy bright. So for now till I see pictures of xblights or heavy cycle I'm just going to say it's one of those two because iv.seen most the other lights. And I'm totally putting it on

 

[rah7777777]

I can promise you it's not XB Lights.
I've hand built every light I've sold and that unit is not mine.

I'd bet a few bucks it's Heavy Cycles. I've only heard good things about them.

 

[John422]

O **** I totally forgot that is your username. Ok. Thanks for the help man. And I will admit your lights are my dream lights but I definitely confertable with this one. It looks just like your grid for option 5 which is the one I wanted. Just wondering. Could I ever buy a smoked lens from you? I have a clear and red one. But the clear one has a hole in it

 

[DrogeN Omen]

is it hard to replace LEDs in these???

i have 4 LED's that have died.

 

[Shawns]

Should just be soldered onto the board. Shouldn't be that hard depending on which ones they are and where they are located.