• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

ignition/starter problems x1

Buellxb Forum

Help Support Buellxb Forum:

tommy99

New member
Joined
Jul 24, 2020
Messages
2
starter motor stopped 3 weeks ago on my x1 efi, 99 model, order a new one from us, and replaced it today, bike has been without battery 3 weeks, but charged it and starter motor works well, but no i have no spark on spark plugs, and the speedo/tacho meter dont get to up peek and down as before when i turn ignition on.
side stand switch is ok, clutch switch bypass, i hear fuel pump start and stop when pressure is ok. someone with some tips /advise?
 
starter motor stopped 3 weeks ago on my x1 efi, 99 model, order a new one from us, and replaced it today, bike has been without battery 3 weeks, but charged it and starter motor works well, but no i have no spark on spark plugs, and the speedo/tacho meter dont get to up peek and down as before when i turn ignition on.
side stand switch is ok, clutch switch bypass, i hear fuel pump start and stop when pressure is ok. someone with some tips /advise?

Have you checked the fuses? Also have you checked to see what the output is from the ECM? Or verified that the connector is clean and firmly seated? Did you check the ignition relay?
 
Hei. checked the fuses, and connector ecm, its ok, not checked output ecm, dont have any paper/handbook for the bike, and where is the ignition relay placed?
its my first american bike...
 
Hei. checked the fuses, and connector ecm, its ok, not checked output ecm, dont have any paper/handbook for the bike, and where is the ignition relay placed?
its my first american bike...

It should be in the fuse box on an X1. On my S1, they just hang off of tabs welded to the frame.

You can get a manual at buellmods.com
 
You are useless. Help the guy out for christ's sake. People come here for help, not to be condesended to by a smug prick.

Here is a picture showing the location.

FUSES.JPG
 
Back
Top