Just an idea (didn't know where to post this)

[cb750]

One day I did the hidden caliper mod, and needed to fill the rear resevoir. that thing is a pain to fill, so I looked around the garage for a bit. I found a milk jug, and the handle gave me an idea… I cut the handle off with a bit of the side, and it makes a perfect 90* funnel for filling that resevoir.

 

[John422]

Hah awesome! [up] if I ever run across it now I know how.

 

[thrstrmech]

nice, thanks for sharing

 

[Internet Annoyance]

good use of materials, A+ [up]

what i do is go to a farm store, or order from a veterinary supply place, and get the REALLY big syringes, the kind about 1 inch in dia, and about 7 inches long, the kind where its not even a needle on the end, just a long pointed end on the plastic. most are marked off in CC and ML, put a small rubber or clear plastic line on it (Clear fuel line works such as for Motocross bikes) and use it to service fluids in hard to reach areas or measure the amount serviced. I use them for fork suspension servicing all the time as you can measure the amounts.

 

[Dave A]

[up] rep point,

 

[wolfo68]

what i do is go to a farm store, or order from a veterinary supply place, and get the REALLY big syringes,

I just go to work and tell my boss I'm going to steal one.

 

[Matteson]

Ya, the turkey baster is my friend for fluids