Just another problem

Buellxb Forum

Help Support Buellxb Forum:

cpatt

Well-known member
Joined
Sep 9, 2011
Messages
296
Well first time ive taken the bike to work.... And well its going home in a pickup bed.. Started missing alot on the highway on the way in. so im guessing in this order plugs, coil, wires. It did throw a code so I check that when I get home.
 
well i just go the codes i got a
13 witch is an 02 censor code
and a 15 witch is the air flow sensor witch could be old from last time i took the bike apart

and the bike wont stay runing at all now. does the 02 censor make sence?
 
oh and i just noticed that the low beam isnt working. i dont no if it has any relivance but that could just be a bulb
 
the low beam had no relivance to the problem the bulb was shot.

and i whent through my wires and checked for shorts on the o2 censor and the air flow. and didnt find anything. when i get new plugs tomorrow ill see how she runs. but i just dont see this being caused by the o2 censor. so i might try replacing the coil first because i have an extra
 
well i replaced the o2 censor... and well nothing. its doing what my bike did the first time i replaced the engine. it would just go for a 10-20 sec and then shut right down. no codes nothing... any suggestions... maybe i burnt out the ecm again.... idk how this time but
 
i fixed it guys. i adjusted my AFV to 135% and shes runing like a champ. i think that means i need a new air censor in the air box, are those readily avalible? is there one from like a car or something i can use.
 

Latest posts

Back
Top