just sick

Buellxb Forum

Help Support Buellxb Forum:

sledhead007

Well-known member
Joined
Jul 18, 2011
Messages
471
of my bike running like sh!t every so often for no reason, so i am going to order a ecm cable and do some mapping,change the plugs and go from there. my bike is an 09 so i believe i cant use ecmspy what are my other options?
 
TunerPro is available to use, as is the new ECMSpy Mono.

If you'd like help in the process, come check my business out: The Tuniversity. For about the same cost as an EBR ECM, you can have a fully custom map.
 
max, i sent ya an email. you respoded very quick and i was gonna use you. but i ended up having to move to a new place in about a week, so im really short on $ i will be heading your way soon. but i just need to get my bike back on the road first. thanks for all the help man. [up]
 
oh while my bike it worn apart, what is the easiest way to replace the tranny vent tube? mine has a nice burn hole from the headers
 
I left mine alone...but it looked like a metal zip tie....id say just pull or cut with pliers. it was easiest to get to with my frame off.

Also i have been using ECMspy for mono on my 1125r
 
Obviously a good tune will help any bike and is always a good idea. BUT a little reminder to all you guys, keep up on the maitence. I'm a auto mech. and I can not get over how many cars I see daily that just run like ****. I always recommend plugs, wires, a fuel filter and a good fuel system cleaning and the few that actually get it done ALWAYS run way better. Sorry to rant.
 
i grew up in a huge family owned auto shop, i know what you are saying but a bike with just over 4k miles shouldnt need a tune or plugs when its bone stock. from what i am seeing on this site is the 09 is known for this start-up and stall issue with few leads to the problem.
 
Back
Top