kinda sorta denoided it

[bwylie_99]

So after changing the oil.....rather messy....then the plugs......front ones a b!tch.... I disconnected the cable to the throttle miser and wow does she go. Do I need to do more then just remove the cable? I left it plugged in, just removed the cable. Now if that woruld thleust leave me a ebr ecm.....oh my

 

[bwylie_99]

That went all wrong at the end.....

 

[d_adams]

It's only a couple of bolts holding it in, frees up a tiny bit of weight. I'd take it off, install the race ecm to match your exhaust. Glad the image came up as a null one so we can't see it if it went all wrong as you said. Might scar the wimmen and childrenz.

 

[bwylie_99]

Well I put it back together already. I left it plugged in and I'm still getting a com error

 

[d_adams]

Comm error is something different, it's not the solenoid.

 

[mowgoli84]

we talking denoiding an 1125? If soooo.

You remove that resistor all the way, cable and unit and use this plug. Resistor plug will keep you clear or any Code or CEL. And you're right, it does change the characteristics of the bike some.

http://www.erikbuellracing.com/store/resistor-plug.html

 

[d_adams]

A race ecm will also ignore the solenoid, no errors from it missing.

 

[mowgoli84]

A race ecm will also ignore the solenoid, no errors from it missing.

[up]

I'm running a tuned stock ecm; wonder if I would get CEL.