LED turn signals on 2002 m2 Cyclone. need help!

Buellxb Forum

Help Support Buellxb Forum:

sandman_44

Member
Joined
Nov 8, 2010
Messages
5
I just installed front and rear LED turn signals on my m2 and at first they didn't work. after doing some digging, i found out i needed a new flasher and went to auto zone to get an EP-36. plugged it in and the right side of my bike's signals work perfectly but the left side still don't work at all. is there anything else i could be missing?HELP.

i posted this in the m2 section and so far no replies. hopefully this will be helpful. thanks.
 
The ep36 say's for led lights on it?
Do they flash at the right rate?
try revesring the wire on the side that does't work led's are diodes they can only flow power one direction.
 
yes. the flasher has led printed right on it. the right side that works flashes at the right rate as far as i can tell. i have also tried switching the wires on the left side for all possibilities and still nothing.
 
Back
Top