Cooter
Well-known member
Check the pics, PM a fair offer and it's yours!!! Daddy needs some room
-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
Lightning/ Firebolt garage clean out.
- Thread starter Cooter
- Start date
Help Support Buellxb Forum:
Cooter
Well-known member
I only have the brake side, but it's complete.
For a lightning LONG. Right side
LSL Slider. Bolts to the primary cover
For a lightning LONG. Right side
LSL Slider. Bolts to the primary cover
Cooter
Well-known member
About 350 miles on this 530 (not 520) chain conversion. The only old part is the stock idler bracket. It has a set screw to keep the adjustment that works pimp. Everything you need!
PBI 27 tooth steel sprocket
51 tooth rear
Bike Master 530 O-ring chain
PBI 27 tooth steel sprocket
51 tooth rear
Bike Master 530 O-ring chain
Cooter
Well-known member
This thing is perfect.
This is not perfect But it works perfectly! 50-60k miles, you could use it to test your new volt display!!
This is not perfect
But it works perfectly! 50-60k miles, you could use it to test your new volt display!!
Cooter
Well-known member
I also have this chain conversion. DID 520 chain. 22/ 52 sprockets. The chain usable but fairly old.
Cooter
Well-known member
Carbon fiber oil scoop for the stock smaller oil cooler. The cracks come free with purchase!
I have a LEFT side carbon fiber scoop in about the same shape (cracks).
I have a LEFT side carbon fiber scoop in about the same shape (cracks).
Cooter
Well-known member
Stock "small" right side scoop
Cooter
Well-known member
It won't let me edit... but the close up of the front wheel is a ding, not just paint damage. I think someone tried to straighten it because the rest of the powder coat is really nice. I dunno, it's cheap. The rotor and hardware are nice too!
The rotor and hardware are nice too!
Cooter
Well-known member
PM'd ya.
06XB12SS_LOVER
Well-known member
Is the red seat cover( forgot the actual name for it) for a S or SS? I call dibs if its for a SS.
Cooter
Well-known member
The red seat cover is for a firebolt, CR, or R.
egobuster1
Well-known member
- Joined
- May 1, 2013
- Messages
- 158
how much for the complete chain conversion (w/idle bracket)
SlickRidin
Well-known member
- Joined
- Dec 2, 2010
- Messages
- 287
Pm'd
SlickRidin
Well-known member
- Joined
- Dec 2, 2010
- Messages
- 287
Gtp3800 - did not receive one?
SlickRidin
Well-known member
- Joined
- Dec 2, 2010
- Messages
- 287
Wow clearly I need to go back to bed gtp3800 hahahaha
lowkey
Well-known member
I'm interested in the lightning long frame puck, do you have the glue for it also?
Cooter
Well-known member
Returned all PM's
@ low-key
You don't need glue. It comes with preinstalled and never used 3M tape on the back.
@ low-key
You don't need glue. It comes with preinstalled and never used 3M tape on the back.
Cooter
Well-known member
Lots of interest in the front wheel. I need to be very clear because I would never mis-represent anything on here.. It is NOT just powder coat damage. There seems to be a ding at that spot and someone "repaired it".
I think that because the Gold powder coat is really, really nice except for that area. If you buy it, you may want to fix it depending on your level of "Anal-ocity", but you don't get to bitch about it or send it back to me.
I'll take off the good rotor and hardware and sell just the wheel and bearings for $99+ship so no one gets bent out of shape. HAHA! see what i did there?? It's a PUN people!!!!
I think that because the Gold powder coat is really, really nice except for that area. If you buy it, you may want to fix it depending on your level of "Anal-ocity", but you don't get to bitch about it or send it back to me.
I'll take off the good rotor and hardware and sell just the wheel and bearings for $99+ship so no one gets bent out of shape. HAHA! see what i did there?? It's a PUN people!!!!
