lockhart phillips stands?

[Art]

Just wondering what poeple had to say about them. About to pick myself up a pair and wanted to see if their any good. Better than harbor freight I know but by how much? Any one know what size pin I need for the front stand, I think an 18mm is it but not sure. Also the rear stand goes to 13" at the shortest and not sure how wide but it takes 14" I'm sure pretty sure thats the one I need. Thanks for any help. This site is usually good for info like this. -Arthur-

 

[upthemaiden]

I believe the XB swingarm is 14.5" outside to outside. That's on a 2003, I'm not sure if the newer swingarms are any different. I'd check it out to be sure before you order. I had to modify the stand I have a little bit to even get the swingarm to fit in it.

 

[Art]

upthemaiden you have a lockhart? My bud that works on buell at the stealership told me about lockhart so thats the only info I have on them. He said good but wanted to here it from all of you. Their through a guy I know but their in mass and I'm in Maine, So before I make a trip to see the family and pick them up I want to be sure about them. Don't really want to have to modify if I can help it. How about the front pin size? Anyone

 

[upthemaiden]

I don't have the lockhart stand, I have a pit bull stand I found on ebay. The parts that actually touch the swingarm slide back and forth and are held on by bolts, so I had to grind one side of the bolts flat. I'm not sure how the LP stands are setup.