Maybe a stupid idea but let me know what you think

[buelltech]

I had an idea tonight I'm not sure if it would work but will see what everyone thinks. Many people put breather catch cans on when doing the breather reroute does anyone know if it’s possible to use the w aka y bracket (the bracket the holds the oil cooler) as the catch can? I figure you could take the high and of it and drill and tap a hole for a filter and incoming line and drill and tap the low end for a drain. It may be more trouble than it’s worth. Let me know what you think.

 

[firebolter63]

not sure how that would work out since the oil cooler will have pressure some pressure . and the breathers how they work is when you get a build up of crankcase pressure the oil that gets pushed out is what ends up coming out the breathers.