mufler problem

[Shaltis]

Hello, maybe someone has Drummer Muffler?
the problem is that at the point where the pipe enters the cistern is under a millimeter, maybe two milimeters free. and when motorcycle works from virbracion the pipe is hittingthe tank and cause unpleasant sound. maybe have ideas and thoughts how to fix? i do not want to damage the tank. Maybe someone faced with a similar situation?
http://s21.postimg.org/6bjl43t93/100_0358.jpg

 

[d_adams]

Loosen the 2 bolts (above and to the left of your red line) at the front of the muffler, slide the body down a little, tighten it back up. I don't own one, but just from looking at the pic, that's what I'd try first. If that fails, call kevin directly.

 

[Shaltis]

got answer from Kevin. maybie some will help.

"remove the inlet pipe from the muffler...clean it and the opening it goes into on the muffler front cap...put some hi temp red rtv silicone in the spigot hole and insert the inlet pipe and install on the bike and let it set for the night to let it cure and will be fine...its supposed to be loose but not real loose.."

Kevin