Need some help....?

Buellxb Forum

Help Support Buellxb Forum:

xtremelow

Well-known member
Joined
May 19, 2007
Messages
6,230
So I bought a new frame for my bike, all is good BUT the guy left the gas cap in the frame. I emailed him an he said he doesn't have the key.

So do I just drill out the lock? Or is there some trick I am unaware of? I prefer not to spend any money going to a lock smith, but any ideas will help.

Thanks X
 
I've done it with a few gun locks. I took a high speed drill directly under the key openings and drilled out the tumblers.
 
get the vin and have a ordered,get a key that will fit in the key hole then shoot compressed air in the whole while turnning iv used this method on autos,call a lock smith.good luck
 
Thanks guys [up]looks like I will be drilling out the cap. Damn I wish the guy would have just taken it off.[down]
 
Dam i wish you where a little closer i have a few rocker picks probally could get it.
You Tried all the keys you have already?
Herd a roomer there only about 5 not sure if it is true or not
 
Yeah, but You don't want to break mounting tabs you will need. Good luck!
 
u know if Buellchick were to post up some pics in the buell porn **** thread (much like the x-mas ones from last) i could probably come up with a few good ideas :D
 
Hey, I have no problem paying with Sara's ass! :p

I still have to try all my keys, been at work all day. Also the tank is bone dry so no worries about getting a couple shavings inside since it can be blown out, plus it still has to go to powder coat.

I wanted to take apart my gas cap To powder coat it but messed it up so I am just getting a keyless one. That is after I get this cap off my frame though[smirk]
 
Back
Top