New and could use some help

[06RubiLJ]

Just recently picked up my first Buell (07 XB9R) and the previous owner somehow lost the spring and ball bearing that is in the passenger footpeg. I was wondering if anyone knew of a cross referenced part number or a different make that used the same ball and spring. Any help is much appreciated!

 

[Kole_DeWoody]

They are still available from HD.
N0428.02A8
N0429.02A8

 

[am944]

the spring is discontinued. Look for it on eBay.

 

[lowkey]

If it was me, I would pull off the spring and ball bearing from the side you have and head to my favorite local hardware store. Spring length won't matter if you have a dremel and cut off wheel, only the diameter matters. Try for close in spring compression but really all it is for is the detent ball so not critical.

 

[neilrl79]

If it was me, I would pull off the spring and ball bearing from the side you have and head to my favorite local hardware store. Spring length won't matter if you have a dremel and cut off wheel, only the diameter matters. Try for close in spring compression but really all it is for is the detent ball so not critical.

I agree with this.

 

[Cooter]

Cooter says that Cooter is guilty of rummaging through the junk drawer for exactly those things.

 

[Outlaw]

Ha. That's funny. Outlaw does the same thing

 

[Kole_DeWoody]

Are you guys sure?
I just got basically the whole right rear peg, pin, spring, plate and ball about a week ago. Unless the 07 is different from 09. Got them from new castle.

 

[Silverrider]

Will these work ?? If not check with Lance .He is very good source of XB parts.

http://www.ebay.com/itm/New-Buell-O...918871?hash=item3d36d4c557:g:psAAAOSwUKxYYuFw

 

[06RubiLJ]

Thanks for all the help! Definitely going to try a couple of the hardware stores to see what I can find

 

[Outlaw]

06RubiLJ , guess Yer a Jeep guy too .

 

[06RubiLJ]

Haha how could you tell?