New Buell Owner. Long time fan
- Thread starter ChiefXB9R
- Start date
Help Support Buellxb Forum:
thrstrmech
Well-known member
pics or it didn't happen
welcome to the forum...yellow is awesome
welcome to the forum...yellow is awesome
chief_of_smoke
Well-known member
Another chief on the forum. Welcome to the forum.
thrstrmech
Well-known member
[up] nice, you're in good hands here on the forum, lots of knowledge at your finger tips, again welcome to the forum
3rd_times_acharm
Well-known member
- Joined
- Oct 1, 2014
- Messages
- 57
Can't go wrong with yellow on a buell[up].
Enjoy your new ride
Enjoy your new ride
thrstrmech
Well-known member
buellmods.com
rchuff
Well-known member
welcome to the forum and yellow rocks.
Bike was not taken care of by guy before me. Buddy and I have gone over it and luckily all smallthings with no major flaws. List below are things found and corrected.
1. Charcoal Briquette on motor (not kidding)
2. Original HD spark plugs pulled and motor inspected all looked good.
3. Front pads replaced. Couldn't take them out as bolt bead was stripped all good now.
4. Changed brake fluid was nasty.
5. Fixed turn signal that would spin in place.
6. Changed all fluids. Ensured oil plug was torqued properly was hand tight when I picked it up.
7. Replaced headlight bulbs. Was just laying inside socket.
8. Tightened battery cables and that fixed hesitation to start.
9. Aired tires up to proper psi was at 10 when picked up.
10. Washed her up and got her all clean.
11. Cleaned K&N filter and replaced gasket seal.
12. Fixed horn button.
In investigating all this found it has race ecm and race exhaust. Not sure which it is. Has dual oval outlet on both side. She runs great and I'm very excited with her.
1. Charcoal Briquette on motor (not kidding)
2. Original HD spark plugs pulled and motor inspected all looked good.
3. Front pads replaced. Couldn't take them out as bolt bead was stripped all good now.
4. Changed brake fluid was nasty.
5. Fixed turn signal that would spin in place.
6. Changed all fluids. Ensured oil plug was torqued properly was hand tight when I picked it up.
7. Replaced headlight bulbs. Was just laying inside socket.
8. Tightened battery cables and that fixed hesitation to start.
9. Aired tires up to proper psi was at 10 when picked up.
10. Washed her up and got her all clean.
11. Cleaned K&N filter and replaced gasket seal.
12. Fixed horn button.
In investigating all this found it has race ecm and race exhaust. Not sure which it is. Has dual oval outlet on both side. She runs great and I'm very excited with her.
Similar threads
