new rear Brake

[Dingo]

Hello
for all who are interessted for the rear brake mod..or rear Rotor mod
please contact
[email protected] Thomas Pfeffer, Germany

right Rotor is made from an original..its designed to fit Brakes with Brembo mod...250 grms lighter then original..

 

[snrusnak]

More info please. Looks like two different rotor mods, and that doesn't look like the brembo caliper I have...

 

[pfeffi01]

Hello to everybody. Please apologize my bad English, but school is over for a long time. .
I hope it is allowed to post these technical datas here.
Dingo told me about his post here and asked me to put some information in your board.
The rear caliper comes from Luckyhands ( www.luckyhands.de ) a German buell tuner. We joined together and designed two adapters, one for 240mm totors, as the original rotor or wave or the modified as shown above.and one to fit for the EBR-Rotor or the modified 220mm rotor from us. I think this is the only solution, that fits to the EBR-Rotor. Our rotors are milled out of the original rotor as the EBR is.
Here some pictures, first the caliper with the adapter for the EBR or our modified 220mm rotors:

and here bolt on the swingarm:

now the original caliper and rotor compared with ours:

The EBR Rotor is a little bit lighter, about 70gramm.
All the weights are in gr.
We've designed 2 rotors in a diameter 220mm and one in 240mm as the Original is.
220mm Design1:

220mm Design2:

240mm:

Fits with the original or brembo mod.
For further information, our email: [email protected]

 

[motoqueiro]

What caliper is that, is it one of your own, what brake pads do you use with that, does the stock nissin master cylinder work with that caliper
What is the price for the caliper and bracket to fit the oem disc rotor
Thanks

 

[netty2424]

Prices?

 

[xb12rs]

Also may be interested

 

[pfeffi01]

Price here in Germany is 178,-€ including tax (19%) for the caliper, including the pads and the bracket (OEM or 220mm). That means 150€ without tax or 200,-$. Price for shipping is unknown, i can get it tomorrow. The caliper is a mq-caliper and you can use the original pads, delievered with the caliper or we also can deliever more agressiv pads from AP-Racing.
Price for modifiiying your delievered rotor(220mm or 240mm) is 75,-€ including tax, 63,-€ without tax or 84,-$.
We have no experience in doing business to the us-market, but we are open to everything. If there is enough interest in our products, we will try. [smirk]

 

[Dingo]

looks good ...

 

[Dingo]

and works good too....

 

[StangBanger]

Very interested in this...