newbe here

Buellxb Forum

Help Support Buellxb Forum:

turbohearse

Member
Joined
Jul 19, 2013
Messages
21
I just bought a 2008 Buell XB12R firebolt for pretty cheap because its been rear ended I'm checking out the sight because hdforums told me to go here :D
 
Welcome. So did you get the Bike because it was jjust cheap or have you been looking for a Buell to own? Lots odf advice here and using google as your search engine is your friend. OH and posting pictures is pretty much a must here if you want some quality help....
 
I always wanted a Buell XB12R Firebolt and I bought a 2010 Harley Davidson Fxd at that time and when I saw one up for grabs in my area I bought it as soon as it showed up on the internet. pics of it

970597_10151713588361445_1659789988_n.jpg

946244_10151713588276445_754857494_n.jpg

1043910_10151713588166445_263837046_n.jpg


oh yea and my Harley
550847_10150900681071445_381592447_n.jpg
 
I ordered a subframe for a Buell from ebay it was from a 03 xb9r so it should work i wired up the new turn signals and just wonder what wire is for the brake light and the running light for the rear is it orange like the Harley's? and the front stud's are stripped on the front exhaust I need to take the exhaust off of it and replace the studs I found a video on youtube of how to do it without removing the engine.
 
Very nice bike. Yes the subframe should bolt right up. The orange and red striped wire is your positive i believe. If you have a volt tester, connect it to the wire and press the brake. If you get volts than you have the corrext wire. There are on two wires to the brakes so you should be able to figure it out. Let us know if you need a picture of the underseat of a firebolt for comparison.
 
Welcome! That will be a nice ride! Always liked that color combo! [up]

Let us know if we can help you out with anything!

5-0dro
www.5-0dro.com
 
thanks guys my subframe is coming in today and I'm thinking about using a 1/4" drill bit extender to drill out the studs and tap them out of the head so I don't half to take the exhaust all the way out.
 
Does anyone have pics of under there seat where everything goes? and how do the seats go in do they bolt in?


oh yea newbe question how do you get reply's sent to email? lol
 
Back
Top