No more sheets.

[theoctopus]

Hey guys,

So all development on the sheets has been stopped. There's no need for them anymore.

Word is ECMSpy for Mono will be released soon, and it will cover all configs for XB and 1125 bikes.

Regardless of all of that, you can now go to www.ecmspy.com, download the tunerpro file for YOUR bike's config, and load it into TunerPro. It will provide you with all the info you need on how to adjust values. Combine that with the new Tuning Guide, and you're set. All you need is the ubiquitous data cable (may I suggest you take a trip to http://www.xoptiinside.com/buell_store to buy them) and a way of communicating with your bike's ECM (ECMSpy or, god forbid, OSB Com Utility).

Let's hope Mono gets released soon, but with or without it, now all bike's ECMs can be understood and modified.

 

[uh2]

Niiiiiiiiiiiiice

 

[nineronesix]

Im new to all this but I don't see on the Ecmspy website where the later bikes are covered. Only thing I've seen so far is the Ohio software. Am I missing something?

 

[theoctopus]

If you look under the "spezific" heading on the left side of the screen, you will see all the bike configs. Click the one that corresponds to your bike's ECM, and download the tunerpro file for that config.

 

[dave_xb12r]

Hopefully anonymous will leak an early download of the new ECMspy. [smirk]

 

[edipis]

I still have some cables left. $45 shipped in the US.

[email protected]

 

[thunderstormgrowl]

edipis
I have not taken my ecm off to check it out. Will your cables work with a 2010 ecm?

 

[edipis]

Yes. the cable will work. Don't take your ecm off. The cable plugs into your diagnostics port.

 

[thunderstormgrowl]

OOOOOO. Thanks for that tip.

How many cables do you have?

 

[edipis]

Not sure on an exact number, but I have quite a few. I bought in bulk, so I could get a decent price.