I have a 2008 XB12 firebolt, recently after washing the bike I lost my tail light and turn signal quit working, but the brake light is operational. I bought the bike used and have no manuals, I did find some fuses and relays tucked in the fairing, but none seemed to be dedicated to the tail light or turn signals. I am hoping to do some riding this 4th of July so and advice would be greatly appreciated. Thank you.
-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
No tail light or turn signal where to start?
- Thread starter sewerrat
- Start date
Help Support Buellxb Forum:
I forgot to mention in my original post, the I have performed a forum search on this topic with little success. The word tail light brings up several pages of posts, mainly discussing aftermarket mods. I've tried to weed through them but have found nothing pointing me to what relays or fuses I should check for tail light and turn signal. So any info on this would be helpful. Thank you.
joebuell06
Well-known member
Sewerrat, are you suspecting water damage? What do you mean when you say:
I've had my brake light connection at the handlebars come disconnected before. It is a little two-prong connector under the brake perch, but I don't know if that is what you are looking for.
[confused]
I've had my brake light connection at the handlebars come disconnected before. It is a little two-prong connector under the brake perch, but I don't know if that is what you are looking for.
I don't know what to suspect, I was just detailing the last known time that my tail light and turn signals worked. This is not a brake light issue, my brake light operates as it should when i apply my brakes. The tail light does not illuminate at night(or day) and the turn signals ceased to function at the same time. I am hoping it is a simple fix such as a blown fuse or relay due to water from washing the bike. But i am relatively new to the Buell bike and cannot locate any fuses or relays marked as tail light or turn signals. I have found relays and fuses behind my fairing but they dont seem to be related to my problem. I am hoping some more experienced owners could give me some direction in this. Thank you for your reply. I do apologize for any confusion, my orginal post does seem poorly worded.
Mystery solved, it did turn out to be a blown fuse. A 10 amp marked ACC on fuse box cover, I dont know why ACC would stand for tail light or turn signal but it does. Fortunately, I found this by tracing my way back from the tail light to the fuse box. Because I now know my blown fuse was caused by bare wires at the tail light and rear turn signal assembly(probably the two prong thing at the perch Joebuell06 mentioned), which most likley shorted when I washed the bike. Thank you to joebuell06 for taking a interest in my problem, I did find it interesting that with over 40 views no one chose to tell me about the ACC fuse. Please let me know if I can improve my posts on this forum to generate more responses. Thank you. Back to work on the bike, should be riding this 4th of July afterall, even if it is going to be in the 100's here in Iowa.
joebuell06
Well-known member
Right on! Good to know, now get out and ride that all 'merican thing [cool]
CityBoiX5020
Well-known member
- Joined
- Aug 6, 2011
- Messages
- 311
Im having the same issue man. Except my brake light and low beam doesnt work either. Ill try the ACC fuse when I get off, hopefully thats all it is!
I had similar issue but included blinkers, rear running light and my instrument cluster on a 2003 Xbr9s all died when I turned on blinker while riding in the rain. It was indeed a blown 7.5 amp ACC fuse. Got a new fuse and it’s all back to normal again. Guy who owned bike before me removed rear blinkers and never bothered to tape up and protect the connector ends which were laying under the seat and I suspect got wet while the bike was parked in the rain.
kennethdwhite
New member
- Joined
- Jul 6, 2019
- Messages
- 1
Same here on XB9S, instrument cluster, indicators, rear lamp all not working. ACC fuse fine changed it new one still nothing. Put dielectric grease in electrical connectors under headlight cowel, incase of water ingress. That didn't work. However I left ignition on while putting bolts back in headlight cowel and they all came on? Turned ignition off & back on and they all stopped working again. Removed cowel checked all connectors but nothing. So not a clue as to what is causing my issue?????
Barrett
Well-known member
All Lightning models have fuse box under seat. Carefully check all fuses to include AUX...ACC...LIGHTS.
All those components simultaneously failing is typically loss of ground. All grounds black in color and they would be:
bundled wires at front under triple clamp OR at pinch bolt
braided under airbox cover
rear sub-frame seat rail left and right sides
