Oil Change...Search FAIL by me

Buellxb Forum

Help Support Buellxb Forum:

303xb

Well-known member
Joined
Mar 8, 2010
Messages
1,298
i have searched high and low, can someone please help me locate a post that had links to several DIY/maint. mods???

looking for a DIY oil change, and have searched countless pages for 20 min. I know I'm not terribly retarded, but I can't find a step by step
 
go to stevens 150 links page there are some there but most you can get from the manual download at the top
 
oops idiot, forgot about the manual.

i dont have a stand (and a broken leg) so im just leaning the bike up to drain all oil, etc can someone confirm approx. amount of trnas oil in primary is 1 pt on a 2003 xb9s??
 
yep just take the cover off put in a funnel and put in the new oil. Make sure the bike is up straight when draining. I use a piece of 2x4. Be careful though cause the wrong bump will knock it over. I only use the block while draining, everything else on the stand.
 
Use aluminum foil to protect your exhaust!! Otherwise the oil just drains all over it...Found this out the hard way the 1st time[mad]
 
got it all done, used tin foil etc and put in 2.5 qts total in the swingarm and 1 qt in the primary. started her up and it PURRRED like a kitten. amazing difference.

put mobil1 20-50 in both holes...cannot wait to take it out. THANKS for all the help +1 rep for all..
 
[up] God one 50dro, been doing oil changes for years and making a friggin mess everytime. That's so simple, god I feel stupid. Wayne
 
I use a 2 litre plastic bottle wrapped in tinfoil with the end cut at 45 degrees so it seats under the drain hole resting on the exhaust with the other end in the drain pan, works cherry for me..
[smirk]
 
Thanks Wayne but I think I got that trick from here...Can't take credit for that one...;)
 
dave, got it, and for some gawd awful reason i forgot about those links. got the fluids changed and she purr's like a kitten now.

thanks again.
 

Latest posts

Back
Top