Oil pressure guage

[cap44]

does anyone know where to get an oil pressure gauge to install in-line with the lines to the cooler. When I bought mine, the return oil line was kinked and the pressure built up inside the oil cooler and accordianed the top of the cooler and split it

 

[nativeXb12Rbuell]

summit racing or jeggs would have them 2 best places to buy them. , or maybe orielly's or advance auto parts autozone , napa, they could order it if they dont have in stock.. you just need to know the size of the line and maybe the new fitting and flare tool.
may need to install a tee of some kind with a line to insert pressure sensor and run hose somewhere you can see the gauge easily..

hers a motorcycle oil gauge and all you woul need to do is put a good high psi or an fitting tee in your oil line and attach a high psi braid line (for oil resistant inside) and run that braided line to your gauge where you want it at.you might need a sending unit ..
http://www.summitracing.com/parts/ALM-7122/

here's something i found .. it is an inline sending unit just run the hose frome this into your gauge you buy...I like it might try this ,in the future for me..
http://www.rhinotalk.net/forums/yam...-crap-inline-oil-pressure-gauge-adaptors.html

forum about it
http://www.rhinotalk.net/forums/yam...-crap-inline-oil-pressure-gauge-adaptors.html

 

[nativeXb12Rbuell]

http://www.utvcrap.com/product_info.php?cPath=527_535&products_id=3380

sorry put the same link in both here the link for the inline sending unit from utv crap.

 

[nativeXb12Rbuell]

correction again damn , you insert the sending unit in it.depending on if you want a old style mechanical with hose running into the gauge, or an electric sending unit running wire to the electric gauge. sorry about all that i wasnt thinking straight for minute . but it would probably be the fastest or esiest way to go for an inline.