• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

? On rear axle bolt specs.

Buellxb Forum

Help Support Buellxb Forum:

Effxfinity

New member
Joined
Aug 4, 2023
Messages
3
I recently had to change rear tire but axle bolt wouldn't budge. Apparently previous owner/mechanic cross threaded and kept going. Got new axle bolt after snapping old one. Want to run a tap through and chase the good threads and clean out the bad. Anybody know what size tap and thread count is needed? 06 ulysses xb12x 2 bearing rear wheel. Got the axle bolt from st. Paul harley/buell. Part no. GO321.5AK Genuine 03-10 Buell Rear axle... Thanks for any help in advance.
 
Last edited:
Since you're holding the new axle, the answer is literally in your hands. It will be a VERY expensive tap to buy. Take a 6 pack to your local machine shop and see if they're friendly enough to loan you what you need.

Alternatively get a proper fitting bolt and cut 4 perpendicular grooves in the threads with a 1/16" cut off wheel to make your own thread chaser.
 
Thanks Cooter I used the old bolt and cleaned up threads after altering it kinda like you suggested as well as grinding down the diameter of the first inch or so. Worked well enough for me to mount rear tire. I am back on the road blowing out the cobwebs in the corners of my mind. Thanks alot!
 
Interchangeable swingarm?

Swinging arms are all over e-bay

I am aware of several on there that are reasonably priced <$100 but none were a match to my ulysses xb12x 06. I have read some posts on here that state that some are interchangeable between years and models. In the future I would like to own another bike like mine to use as a parts bike or a possible project bike. I have seen awesome custom buells online.
 


Write your reply...
Back
Top