pipe mods? anyone "gut" it some?

[LOK222]

I just would like it a little louder..

I know on past bikes it was common to just drill holes or take out one of the baffles..

anyone do that with these?

can I do so and not need to re-map etc...?

 

[Stevenc150]

- Thee Exhuast Mod

With this mod, a TPS reset is probably all you'd need; if that.

 

[LOK222]

Thanks Stevenc!

 

[Stevenc150]

Glad to help.

 

[LOK222]

Steven, you think I'd need to tps reset?

I wouldn't think you'd even have to without changing intake?

 

[Stevenc150]

Seems slightly different for everyone. It's always suggested doing a TPS reset after doing a major mod like exhaust/intake. But some have gotten away with not having to. I'd suggest getting one, since you just did the mod and it's listed in the manual as a regular maint. item anyway.

 

[LOK222]

i had planned to to this yesterday and after stripping out the head of TWO Torx bolts.. I finally got the chin fairing off, the other cover off and it looked like taking the muffler off woudl be a B*tch! there are lines (brake?) lines running IN the muffler clamp!

did you guys just take off the hose-type clamp or the bigger bolts that holds it ALL to the bike and what about the lines?

 

[XB12ed]

did you guys just take off the hose-type clamp or the bigger bolts that holds it ALL to the bike and

Yes, just remove the 2 band clamps at the rear and the 1 at the front. Then no worries on the oil lines.

 

[LOK222]

Hey XB12ed.. so that's it? take off the two band clamps in back and front and the muffler can come down?