Power Lag Issue

[xtreme]

Ok so I think I may have figured out my issue of when I go WOT. The symptons were when I would be ridding and crack the throttle it would lag. So after doing some research, I think it was when I did the tail swap. I had the side rails powder coated. So I disassembled the rails today and realized that my ground point on the rail was powder coated over as well as where the rails bolt to the bare portion of the frame. Took a sander to those points. It should be making a good ground now. I won't be able to do a test ride until I get my plastics back from paint. I will keep everyone posted.

 

[anrkizm95]

i hope that solves your issue.im surprised that was your only problem.

 

[xtreme]

We will see. I wiil be doing a breather reroute and catch can then I will do a test run.

 

[bobaganoosh]

that was the problem after i painted mine but it wouldn't run at all