Prob - AMC Stuck open

[GooseOne]

Hya,

I was out riding today, moderate heat, and the diags light came on. and stayed on till I restarted the bike.
Looking at the DTC with ECMSPY I found that the 'AMC stuck open ' error was the problem ...

ANy thoughts on how to get rid of this feature, I have an AHP exhaust on, and the cable actuator is un hooked, but the electrical connectoin is still connected ...

Many thanks

 

[GooseOne]

Hya again,

Just been reading up and looking at the ECMSpy prog, and it looks like there is a facility to turn off the exhaust valve, or rather uncheck 'Enable exhaust vale' logic tells me that this would do the trick, but am I wrong...

Many thanks

 

[joebuell06]

Goose, it's easy to disable it. It should be under the diagnostics tab, on the far right side. Be sure that you have ECMSpy in "professional" mode.

 

[GooseOne]

Cheers Joe,

Much appreciated ... Got it sorted ...

Many thanks ...