Can someone help me out with some pics of under the S seat. i am finishing up the paint on the rails now and pics would help out on how things were relocated. I know the brake resevoir is different and have been searching the forum, but cant seem to find any good pics of how it would look. Any help is appreciated and any tips would be cool too. Thanks guys.[cool]
R to S tail swap. Need some pics
- Thread starter GAXB9R
- Start date
Help Support Buellxb Forum:
thrstrmech
Well-known member
look at the first pic in this post...the rear brake res is forward and below the seat pan on the right side, there's a threaded tab which is where the res is mounted to right above the master cylinder look here this is what your's should look like when you get it bolted up
you can see the res in the pic below, look fwd of dongle below battery...the res cap is visible next to shock spring
you can see the res in the pic below, look fwd of dongle below battery...the res cap is visible next to shock spring
If you didn't get an s fluid reservoir, you might want to make a custom bracket for it. I did that the first time and it worked just fine. I moved mine about an inch further toward the center of the tail from the stock s position instead of trying to put it under the seat.
buellbradski
Well-known member
- Joined
- Mar 29, 2011
- Messages
- 1,138
I would get a brake res for a s tail . That will make it alot easier and cleaner.
thrstrmech
Well-known member
he's referring to not having the ECM and bank angle sensor located under the seat...it's R to S tail conversion, R's have the before mentioned stuff under the lower side of the fairing stay...
I mounted my R reservoir under the airbox cover on mine. Of course I did an extensive airbox mod to get there. A simple machine screw and the bottom of the reservoir holds it in place.
