R vs S rearset

[Draxsonimy]

how much of a difference in angle is there between the two?

any one have one of each for a side by side picture?

 

[snrusnak]

Huge difference even though it's only 1". For me anyway. I'm 6'4" and the s (same as ulysses) pegs on my bolt made my bike almost unbearable on my knees to extremely comfortable.

What change in angle are you referring to? Bike lean angle? I took the feelers off the lower pegs and can still use the whole tire.

 

[konarider94]

thats just the peg though. I believe the brackets are the same.

 

[oh9bolt]

Rearset or pegs?

The pegs = 1"

Rearsets = The Same

 

[go cytocis]

Even though the R pegs have longer feelers on them, they still provide 47 degrees of lean angle as compared to the lower S pegs, with shorter feelers, which give only 44 degrees of lean angle. I have run both the S & R pegs, using the full profile of the rear tire in each case. I would routinely scrape the S pegs, however I've yet to touch down an R peg.

 

[Draxsonimy]

just more or less angle of the acutal bracket.

just trying to get my feet back a bit more

 

[snrusnak]

yeah the rearset/bracket is identical. Only the ulysses uses a different rearset/bracket.

It does not move your feet back at all, just down 1"

 

[snrusnak]

Even though the R pegs have longer feelers on them, they still provide 47 degrees of lean angle as compared to the lower S pegs, with shorter feelers, which give only 44 degrees of lean angle. I have run both the S & R pegs, using the full profile of the rear tire in each case. I would routinely scrape the S pegs, however I've yet to touch down an R peg.

I went from R pegs(on my bolt) to ulysses pegs(same as s) and last year at the dragon I was scraping the feelers non stop it seemed like. Even when I was leaning what seemed like not that much. I removed them and was then able to lean more and use the whole tire.

 

[Draxsonimy]

sounds good, i was thinking the brackets were different